BexGears DIY Electric Guitar Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Welcome to this bexgears DIY electric guitar review. This unbuilt instrument kit allows you to construct a six-string guitar around an okoume wood body and a maple neck. The body features a curved top with a mahogany veneer cover, paired with a 22-fret composite ebony fingerboard with fret inlays. BexGears supplies two humbuckers, a three-way pickup selector switch, a butter-colored pickguard, and all necessary electric parts in the box. Reviewing these dimensions and materials helps you gauge how the base components align with your intended project.
What stands out
- Okoume wood body with a curved top and mahogany veneer cover
- Maple neck with a 22-fret composite ebony fingerboard and inlays
- Dual humbucker pickup configuration with a three-way selector switch
- Package includes a butter-colored pickguard and all electric components
Who it fits
Good fit for
This kit suits hobbyists and builders who want a dual-humbucker setup with an okoume and mahogany body foundation. If you want a 22-fret layout with composite ebony and standard fretboard inlays, this package supplies the necessary woodworking and electronics. It fits anyone looking to wire and assemble their own six-string guitar without sourcing separate pickups or switches, since all essential electric parts and a pickguard come included.
Who should skip it
Skip this model if you need a fully assembled, ready-to-play electric guitar directly out of the box. Players who prefer single-coil pickups or a five-way pickup selector will not find those options here, as the kit strictly provides two humbuckers and a three-way switch. Musicians seeking extended-range seven-string configurations or 24-fret fretboards should also consider alternative instruments instead of this 22-fret, six-string kit.
Verdict: The BexGears DIY kit delivers a solid combination of okoume wood, mahogany veneer, and dual humbuckers for builders assembling a six-string guitar. It provides all fundamental electrical and body components to establish a traditional 22-fret platform.
Key specs explained for this kit
Body Material: okoume wood
Okoume is a lightweight African hardwood often used in guitar bodies. It offers a balanced tone with clear highs and warm mids. This material is easier to handle than heavier woods like mahogany. You benefit from reduced weight during long practice sessions. When shopping, compare it to alder or basswood for similar weight and tonal characteristics.
Neck Material: maple
Maple is a dense, hard wood known for its bright attack and sustain. It provides a smooth playing surface that feels fast under your fingers. This material is durable and resistant to wear from fretting. You gain clarity in your notes, especially in higher registers. Look for maple necks if you prefer a crisp, articulate sound over a warm, dark tone.
Fretboard Material: composite ebony
Composite ebony mimics the look and feel of natural ebony using engineered materials. It offers a hard, smooth surface for finger movement. This material is consistent in density, ensuring stable intonation across all frets. You get a premium appearance without the high cost of rare woods. Compare it to rosewood or maple for different tactile experiences and maintenance requirements.
Number of Strings: 6
A six-string configuration is the standard for most electric guitars. It covers a wide range of notes, from deep bass to high treble. This setup allows you to play chords, melodies, and solos easily. You can access a vast library of tabs and tutorials. When choosing, ensure the scale length matches your hand size and playing style.
Design and Build Overview
According to the listing, this kit features an okoume wood body with a curved top covered by a mahogany veneer. Okoume is a lightweight hardwood that provides a balanced tone with clear highs. The mahogany veneer adds visual depth and warmth to the finish. You get a maple neck paired with a composite ebony fingerboard. Maple offers a bright, snappy response that complements the body wood. The composite ebony fretboard is durable and smooth, allowing for comfortable play across the 22 frets. Inlays are present on the fingerboard for position reference.
The instrument is a six-string electric guitar. It includes a three-way switch for pickup selection. You receive two humbucker pickups, which deliver a thick, powerful sound suitable for rock or jazz. A butter-colored pick guard protects the body from scratches. All electric parts are included in the package. This means you have the necessary hardware to complete the assembly without sourcing additional components separately.
The listing identifies the color option as YGK-P-N. Six variations are available, including other color and neck combinations. This design suits builders who prefer a traditional aesthetic with modern tonal capabilities. The combination of okoume and maple creates a versatile instrument. You can customize the finish and electronics to match your personal style. The kit structure supports both beginners and experienced builders looking for a specific wood combination.
Setup and Everyday Use
Setting up this BexGears DIY kit requires patience and basic assembly skills. You receive a kit, not a finished instrument. The package includes the okoume wood body with a curved top and mahogany veneer, along with a maple neck. You must attach the neck and install the included hardware yourself. The listing confirms that two humbuckers, a three-way switch, and a butter-colored pickguard are part of the box. You will need to wire these components and mount them to the body. This process involves soldering and precise fitting. The composite ebony fingerboard comes pre-installed on the maple neck. It features twenty-two frets and inlays. You will need to add strings, adjust the action, and set the intonation. The six-string configuration is standard, allowing you to tune to standard pitch. Daily use depends on your build quality. The okoume body offers a balanced tone, while the mahogany veneer adds visual appeal. The maple neck provides a bright response. You can choose from six color variations, such as YGK-P-N or YGK-V-N, to match your aesthetic preference. This kit suits builders who want to customize their instrument’s setup. It is not ideal for players seeking an immediate, ready-to-play experience. You must invest time in assembly to enjoy the benefits of the included specs.
Before You Buy This Kit
This BexGears DIY kit is a project, not a finished instrument. You must assemble the maple neck, composite ebony fingerboard, and okoume body with mahogany veneer. Ensure you have the proper tools for drilling and sanding. The listing includes two humbuckers, a three-way switch, and a butter-colored pick guard. Verify that your existing pickups or electronics match the kit’s cavity dimensions if you plan to swap them. This 6-string guitar uses standard hardware, but check screw hole spacing for bridges and tuners. Upkeep involves finishing the wood yourself. You will need sandpaper, stain, or lacquer to protect the okoume and mahogany surfaces. This kit suits builders who enjoy crafting. It fits alongside ready-made options in the 1 Electric Guitars guide for those who want customization. If you prefer a plug-and-play instrument, skip this. You save money but invest significant time. The curved top design requires careful finishing to highlight the veneer. Check your skill level before ordering.
Check before you buy
- Confirm you have basic woodworking tools for assembly.
- Verify hardware hole spacing matches your preferred bridge.
- Check if you need to finish the wood yourself.
- Ensure you can install the included humbuckers and switch.
The product at a glance
BexGears DIY Electric Guitar Kit Okoume Body Maple Neck
Best for: DIY guitar builders seeking complete kits
- Body Material
- okoume wood
- Neck Material
- maple
- Fretboard Material
- composite ebony
- Number of Strings
- 6
View on Amazon: BexGears DIY Electric Guitar Kit Okoume Body Maple Neck Affiliate link
This BexGears DIY electric guitar kit features an okoume wood body with a curved top and mahogany veneer. It includes a maple neck and a composite ebony fingerboard. The kit comes with 22 frets, two humbuckers, and all necessary electric parts. It is designed for builders who want to assemble a six-string instrument from scratch. You get a complete set of components for a custom build.
Pros
- Okoume wood body with mahogany veneer
- Maple neck with composite ebony fingerboard
- Includes two humbuckers and all electric parts
- 22-fret design with 3-way switch
Cons
- Requires assembly as a DIY kit
- Fingerboard material is composite, not natural wood
- No pre-installed electronics or hardware
Good fit if
- You want to build a guitar from scratch
- You prefer a maple neck for playability
- You need a complete kit with all parts included
Skip if
- You want a ready-to-play instrument
- You prefer natural wood fingerboards
- You do not have assembly tools
Verdict: BexGears DIY Electric Guitar Kit offers a solid foundation for custom builds with its okoume body and maple neck. It suits builders who value having all parts included in one package.
Specifications side by side
| Spec | BexGears DIY Electric Guitar Kit Okoume Body Maple Neck |
|---|---|
| Body Material | okoume wood |
| Neck Material | maple |
| Fretboard Material | composite ebony |
| Number of Strings | 6 |
| Color | YGK-P-N |
| Model | YGK-P-N |
Frequently asked questions
What neck wood does the BexGears DIY electric guitar use?
This kit uses maple for its neck construction. Maple is a dense, rigid hardwood commonly selected for electric guitar necks because it resists warping under string tension. Its structural stability helps keep your instrument aligned properly after assembly. This makes it a dependable choice for your custom build project.
What is the model number of this BexGears DIY guitar kit?
The model identifier for this specific BexGears kit is YGK-P-N. This code designates the exact component package and color configuration listed by the manufacturer. Checking the model number ensures you source matching replacement hardware or documentation during your assembly. You can verify specifications against this exact designation before starting work.
Who is the BexGears electric guitar kit best for?
This product is best for DIY guitar builders who want complete kits. It suits hobbyists who prefer having all required primary components supplied together rather than sourcing parts individually. You get a unified project package that lets you focus on assembly and finishing techniques. It serves makers looking to build an instrument at home.
What material is used for the guitar body in this kit?
The body of this guitar kit is made from okoume wood. Okoume provides a sturdy foundation for custom finishing while keeping the overall guitar weight manageable. Working with okoume allows builders to apply stains or solid color coats directly to bare wood. You get an adaptable platform tailored for your own workshop project.
Who should skip the BexGears DIY electric guitar kit?
You should skip this kit if you want a ready-to-play guitar directly out of the box. Because this is an unassembled project, it requires manual labor, basic hand tools, and setup time. Musicians unwilling to fit components, solder wiring, or adjust action should consider a factory-finished guitar instead of a kit build.
Does the BexGears kit include all parts needed for assembly?
Yes, this BexGears kit includes all standard parts in one package. It is designed as a complete build bundle, eliminating the need to track down separate compatible hardware or electronics. Having everything supplied in a single box streamlines the construction process so you can begin assembling your instrument immediately without missing components.